BLTFC - FAST FINISH, 903-101 WHITE

  • MSDS: BLTFC
  • Manufacturer: CORONADO PAINT COMPANY
  • Product Name: FAST FINISH, 903-101 WHITE
  • National Stock Number: 8010-00N017891
Product Identification

Product ID:FAST FINISH, 903-101 WHITE
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017891
MSDS Number: BLTFC

Responsible Party
CORONADO PAINT COMPANY
308 OLD COUNTY ROAD
EDGEWATER, FL 32032
US

Emergency Phone: 904-428-6461

Info Phone: 904-428-6461

Cage: 33200

Contractor
CORONADO PAINT COMPANY, INC.
EDGEWATER, FL 32132-1812 US

Telephone: 904-428-6461

Cage: 33200

Ingredients

PIGMENTS

Fraction By Weight: 13.1%


VEHICLE

Fraction By Weight: 35.6%


ALIPHATIC HYDROCARBONS

Fraction By Weight: 51.3%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRYING OF SKIN, EYE IRRITATION.
EXCESSIVE INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS,
NAUSEA, UPPER RESPIRATORY IRRITATION. THRESHOLD LIMIT VALUE: 400
PPM.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY, CALL PHYSICIAN. SKIN: WASH WITH MILD SOAP AND WATER,
APPLY A MILD SKIN CREAM, IN SEVERE CASES CONTACT PHYS. EYE: FLUSH
WITH WATER FOR AT LEAST 15 MIN, CALL PHYS. INGEST: CALL PHYS.

Fire Fighting

Flash Point Method:SCC
Flash Point:50.0F,10.0C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE UNSUITABLE EXCEPT AS A
COOLING MEDIUM.

Accidental Release

Spill Release Procedures:WASH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED PERSONAL CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:ABOVE TLV, USE NIOSH/MSHA APPROVED CARTRIDGE
RESPIRATOR OR GAS MASK.
Ventilation:LOCAL EXHAUST: USE WHATEVER IS SUFFICIENT TO KEEP WORKROOM
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON, BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:265F,129C
Vapor Pres:23
Vapor Density:4.1
Spec Gravity:0.944
Evaporation Rate & Reference:1.0(N-BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:WHITE OPAQUE LIQUID; MILD SOLVENT ODOR.
Percent Volatiles by Volume:63.8

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.